Category 03 · Diamond Plasters
The finish is built one controlled layer at a time.
Diamond Plasters supplies jointing and finishing materials for bedding tape, filling joints, protecting corners, skimming surfaces and preparing walls or ceilings for decoration.
Products in this category
- Joint Compound
- Jointing Tape (Paper / Fibre)
- Corner Beads & Angle Beads
- Gypsum Plaster
Diamond Plasters catalogue
From joint reinforcement to final skim.
Choose products by substrate, joint type, setting or drying behaviour, moisture condition and the finish level expected.
03.01
Joint Compound
Powder or ready-mix material used to fill board joints, bed tape and create smooth finishing coats.
- Joint filling
- Tape bedding
- Feathered finish
03.02
Jointing Tape (Paper / Fibre)
Reinforcement tape used with jointing compound to strengthen board joints and reduce visible cracking.
- Joint reinforcement
- Paper or fibre options
- Crack control
03.03
Corner Beads & Angle Beads
Protective profiles that form straight, durable internal or external drywall and plaster corners.
- Straight corners
- Impact protection
- Clean finishing
03.04
Gypsum Plaster
Gypsum-based plaster for smooth internal wall finishes over compatible masonry or prepared substrates.
- Smooth wall finish
- Internal plastering
- Controlled application
03.05
Wall Putty / Skim Coat
Fine finishing material used to level minor surface variation and prepare walls or ceilings for decoration.
- Fine levelling
- Decoration-ready surface
- Thin finish coat
Choose as a complete system
A smooth surface begins below the paint.
Preparation, mixing, coat width, drying, sanding and compatible tape or bead selection all affect crack resistance and appearance.
01
Bed and reinforce
Fill joints and embed suitable paper or fibre tape without trapped air or dry spots.
02
Build the finish
Apply controlled coats, feather edges and allow the material to dry or set as specified.
03
Protect corners
Use beads or reinforced corner products to keep lines straight and resist everyday damage.
04
Prepare the whole surface
Use gypsum plaster, wall putty or skim coat according to the substrate and final decorative requirement.
Category guidance
Questions before you specify.
Use these starting points to prepare a clearer Diamond Plasters product enquiry.
Build the right combination
Ask Diamond Plasters to connect the products.
Share the application, approximate quantity and performance requirement for a focused material discussion.